IP68 Plastic Enclosures - TB-PG-4
Model NO.:TB-PG-4
Terminal Block Box IP68
TB-PG-4PH | TB-PG-4PT | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
![]() |
||||||||||||||||||
Dimension (Tolerance ±1mm) | Dimension (Tolerance ±1mm) | ||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
Feature: | Feature: | ||||||||||||||||||
1. Fixed marks in the center of both narrow sides for drilling holes easily 2. The maximum dimension of hole is 21 mm |
1. Fixed marks in the center of both narrow sides for drilling holes easily 2. The maximum dimension of hole is 21 mm |
||||||||||||||||||
|
|
Rated voltage | AC 400V |
---|---|
Rated current | 15A |
Applicable wire | 0.75mm² ~ 1.5mm² |
Operating temperature | -40 ~ +80℃ |
Fire resistance | PG: UL94-5VB |
Ingress protection | IP68 |
Imapct resistance | IK08 |
TB-PG-4P | TB-PG-4PH09 | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
![]() |
||||||||||||||||||
Dimension (Tolerance ±1mm) | Dimension (Tolerance ±1mm) | ||||||||||||||||||
![]() |
![]() |
||||||||||||||||||
Feature: | Feature: | ||||||||||||||||||
1. Fixed marks in the center of both narrow sides for drilling holes easily 2. The maximum dimension of hole is 21 mm |
1. A cable gland of PG9 installed on each narrow side of standard model |
||||||||||||||||||
|
|